Bypass Frp & Flash Maxtron V13 Cepat Dan Simple

BYPASS FRP Maxtron V13 Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau memakai perangkat Anda kalau telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, kalau perangkat hilang atau dicuri)

Mohon dipakai dengan bijaksana, jangan dipakai pada hp curian dan aktivitas ilegal lainnya. thx

Model Name  : sp7731c_c7367_fwvga_oversea
Model Brand : S50H
Model Device: sp7731c_c7367_fwvga
AndrVersion : 6.0
BaseBand CPU: SP7731CEB
Project Ver : MAXTRON_V13_V04_20170824
Model Ext   : MAXTRON_V13

BYPASS FRP Simple dan cepet selesai, file cuman kurang dari 1MB, Flash gak nyampe 10dtk dah selesai. IRIT QUOTA

A. BYPASS FRP ONLY ukuran PAC 1 MB
ONLY SC7731C

1. Download Firmware PAC Maxtron V13_BYPASS_FRP_ONLY  atau  Download Disini (1MB)

 B. Firmware PAC FULL

1. Download SP7731CEB_sp7731c_c7367_fwvga_6.0_MAXTRON_V13_V04_20170824 atau Download disini

Tool :

1. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
2. Tutorial Flash via research here
3. Driver SPD by InfinityBox
4. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :

• Untuk FRP Maxtron V13 tinggal pake PAC BYPASS FRP ONLY, tinggal load PAC file, flash, 5dtk done
• Boot volume (+/-)
•  Sinyal Aman 

Cara Bypass Maxtron V13  via Research Download

Log Read Flash Maxtron V13
Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable
 ====  Wait for phone...
Phone found! [ 6 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
lashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 6 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 6 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731c_c7367_fwvga_oversea
Model Brand : S50H
Model Device: sp7731c_c7367_fwvga
AndrVersion : 6.0
BaseBand CPU: SP7731CEB
Project Ver : MAXTRON_V13_V04_20170824
Model Ext   : MAXTRON_V13
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W17.27.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : sysinfo.img
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 1553 MiB
Saved to : D:\maxtron\Maxtron V13\SP7731CEB_sp7731c_c7367_fwvga_6.0_MAXTRON_V13_V04_20170824_MAXTRON_V13\
Done!